The goal of this document is to help you get running quickly and with as little fuss as possible.
There are three main components (or processes) to consider when running huey:
- the producer(s), i.e. a web application
- the consumer(s), which executes jobs placed into the queue
- the queue where tasks are stored, e.g. Redis
These three processes are shown in the screenshots that follow. The left-hand pane
shows the producer: a simple program that asks the user for input on how many
“beans” to count. In the top-right, the consumer is running. It is doing the
actual “computation”, for example printing the number of beans counted. In the
bottom-right is the queue, Redis in this example. We can see the tasks being
LPUSH) and read (
BRPOP) from the database.
Trying it out yourself¶
Assuming you’ve got huey installed, let’s look at the code from this example.
The first step is to configure your queue. The consumer needs to be pointed at
Huey instance, which specifies which backend to use.
# config.py from huey import RedisHuey huey = RedisHuey()
huey object encapsulates a queue. The queue is responsible for
storing and retrieving messages, and the
huey instance is used by your
application code to coordinate function calls with a queue backend. We’ll
see how the
huey object is used when looking at the actual function
responsible for counting beans:
# tasks.py from config import huey # import the huey we instantiated in config.py @huey.task() def count_beans(num): print '-- counted %s beans --' % num
The above example shows the API for writing “tasks” that are executed by the
queue consumer – simply decorate the code you want executed by the consumer
task() decorator and when it is called, the main
process will return immediately after enqueueing the function call. In a
separate process, the consumer will see the new message and run the function.
Our main executable is very simple. It imports both the configuration and the tasks - this is to ensure that when we run the consumer by pointing it at the configuration, the tasks are also imported and loaded into memory.
# main.py from config import huey # import our "huey" object from tasks import count_beans # import our task if __name__ == '__main__': beans = raw_input('How many beans? ') count_beans(int(beans)) print 'Enqueued job to count %s beans' % beans
To run these scripts, follow these steps:
Getting results from jobs¶
The above example illustrates a “send and forget” approach, but what if your
application needs to do something with the results of a task? To get results
from your tasks, we’ll set up the
RedisDataStore by adding the following
lines to the
from huey import Huey from huey.storage import RedisBlockingQueue from huey.storage import RedisDataStore # ADD THIS LINE queue = RedisBlockingQueue('test-queue', host='localhost', port=6379) result_store = RedisDataStore('results', host='localhost', port=6379) # ADDED huey = Huey(queue, result_store=result_store) # ADDED result store
We can actually shorten this code to:
from huey import RedisHuey huey = RedisHuey('test-queue', host='localhost', port=6379)
To better illustrate getting results, we’ll also modify the
module to return a string rather in addition to printing to stdout:
from config import huey @huey.task() def count_beans(num): print '-- counted %s beans --' % num return 'Counted %s beans' % num
We’re ready to fire up the consumer. Instead of simply executing the main program, though, we’ll start an interpreter and run the following:
>>> from main import count_beans >>> res = count_beans(100) >>> res # what is "res" ? <huey.api.AsyncData object at 0xb7471a4c> >>> res.get() # get the result of this task 'Counted 100 beans'
Following the same layout as our last example, here is a screenshot of the three main processes at work:
- Top-left, interpreter which produces a job then asks for the result
- Top-right, the consumer which runs the job and stores the result
- Bottom-right, the Redis database, which we can see is storing the results and then deleting them after they’ve been retrieved
Executing tasks in the future¶
It is often useful to enqueue a particular task to execute at some arbitrary time in the future, for example, mark a blog entry as published at a certain time.
This is very simple to do with huey. Returning to the interpreter session from the last section, let’s schedule a bean counting to happen one minute in the future and see how huey handles it. Execute the following:
>>> import datetime >>> res = count_beans.schedule(args=(100,), delay=60) >>> res <huey.api.AsyncData object at 0xb72915ec> >>> res.get() # this returns None, no data is ready >>> res.get() # still no data... >>> res.get(blocking=True) # ok, let's just block until its ready 'Counted 100 beans'
You can specify an “estimated time of arrival” as well using datetimes:
>>> in_a_minute = datetime.datetime.now() + datetime.timedelta(seconds=60) >>> res = count_beans.schedule(args=(100,), eta=in_a_minute)
Looking at the redis output, we see the following (simplified for reability):
+1325563365.910640 "LPUSH" count_beans(100) +1325563365.911912 "BRPOP" wait for next job +1325563365.912435 "HSET" store 'Counted 100 beans' +1325563366.393236 "HGET" retrieve result from task +1325563366.393464 "HDEL" delete result after reading
Here is a screenshot showing the same:
Retrying tasks that fail¶
Huey supports retrying tasks a finite number of times. If an exception is raised
during the execution of the task and
retries have been specified, the task
will be re-queued and tried again, up to the number of retries specified.
Here is a task that will be retried 3 times and will blow up every time:
# tasks.py from config import huey @huey.task() def count_beans(num): print '-- counted %s beans --' % num return 'Counted %s beans' % num @huey.task(retries=3) def try_thrice(): print 'trying....' raise Exception('nope')
The console output shows our task being called in the main interpreter session, and then when the consumer picks it up and executes it we see it failing and being retried:
Oftentimes it is a good idea to wait a certain amount of time between retries. You can specify a delay between retries, in seconds, which is the minimum time before the task will be retried. Here we’ve modified the command to include a delay, and also to print the current time to show that its working.
# tasks.py from datetime import datetime from config import huey @huey.task(retries=3, retry_delay=10) def try_thrice(): print 'trying....%s' % datetime.now() raise Exception('nope')
The console output below shows the task being retried, but in between retries I’ve also “counted some beans” – that gets executed normally, in between retries.
Executing tasks at regular intervals¶
The final usage pattern supported by huey is the execution of tasks at regular
intervals. This is modeled after
crontab behavior, and even follows similar
syntax. Tasks run at regular intervals and should not return meaningful results, nor
should they accept any parameters.
Let’s add a new task that prints the time every minute – we’ll use this to test that the consumer is executing the tasks on schedule.
# tasks.py from datetime import datetime from huey import crontab from config import huey @huey.periodic_task(crontab(minute='*')) def print_time(): print datetime.now()
Now, when we run the consumer it will start printing the time every minute:
Preventing tasks from executing¶
It is possible to prevent tasks from executing. This applies to normal tasks, tasks scheduled in the future, and periodic tasks.
In order to “revoke” tasks you will need to specify a
when instantiating your
Canceling a normal task or one scheduled in the future¶
You can cancel a normal task provided the task has not started execution by the consumer:
# count some beans res = count_beans(10000000) # provided the command has not started executing yet, you can # cancel it by calling revoke() on the AsyncData object res.revoke()
The same applies to tasks that are scheduled in the future:
res = count_beans.schedule(args=(100000,), eta=in_the_future) res.revoke() # and you can actually change your mind and restore it, provided # it has not already been "skipped" by the consumer res.restore()
Canceling tasks that execute periodically¶
When we start dealing with periodic tasks, the options for revoking get a bit more interesting.
We’ll be using the print time command as an example:
@huey.task(crontab(minute='*')) def print_time(): print datetime.now()
We can prevent a periodic task from executing on the next go-round:
# only prevent it from running once print_time.revoke(revoke_once=True)
Since the above task executes every minute, what we will see is that the output will skip the next minute and then resume normally.
We can prevent a task from executing until a certain time:
# prevent printing time for 10 minutes now = datetime.datetime.utcnow() in_10 = now + datetime.timedelta(seconds=600) print_time.revoke(revoke_until=in_10)
Remember to use UTC if the consumer is using UTC.
Finally, we can prevent the task from running indefinitely:
# will not print time until we call revoke() again with # different parameters or restore the task print_time.revoke()
At any time we can restore the task and it will resume normal execution:
That sums up the basic usage patterns of huey. Below are links for details on other aspects of the API:
Huey- responsible for coordinating executable tasks and queue backends
task()- decorator to indicate an executable task
periodic_task()- decorator to indicate a task that executes at periodic intervals
crontab()- a function for defining what intervals to execute a periodic command
Also check out the notes on running the consumer.